Yamaha SR125 1997 Service Manual page 112

CLUTCH
9. Check:
: Push lever position
Push the push lever assembly in the arrow
direction and make sure that match marks
are be aligned ! Adjust.
a Match mark on the push lever assembly
b Match mark on the crankcase
10. Adjust:
: Push lever position
***************************************
Adjustment steps:
: Loosen the locknut 1 .
: Turn the adjuster 2 clockwise or counter-
clockwise to match alignment marks.
: Hold the adjuster to prevent it from moving and
tighten the locknut to specification.
CAUTION:
Take care not to overtighten the adjuster 2
and to remove the free play between both
push rods.
: Tighten the lock nut 1 .
***************************************
4-32
ENG
8 Nm (0.8 m:kg)