Starter Clutch Installation - Yamaha SR125 1997 Service Manual

CDI MAGNETO AND STARTER CLUTCH
3. Inspect:
: Starter wheel gear
(contacting surface)
Pitting/Wear/Damage ! Replace.
SR******

STARTER CLUTCH INSTALLATION

1. Install:
: Starter clutch assembly 1
2. Unloosen the starter clutch assembly by us-
ing the center punch.
3. Install:
: Compression springs 1
: Spring caps 2
: Dowel pins 3
YP404131
C.D.I. MAGNETO INSTALLATION
1. Install:
: Shim 1
: Starter wheel gear 2
: Woodruff key 3
2. Install:
: C.D.I. magneto assembly 1
NOTE:
: Clean the tapered portion of the crankshaft
and the magneto hub.
: When installing the magneto rotor, make sure
the woodruff key is properly seated in the key
way of the crankshaft and turning the stater
wheel gear 2 clockwise.
4-48
ENG
30 Nm (3.0 m:kg)