REAR WHEEL, REAR BRAKE AND DRIVE CHAIN
T******
REAR WHEEL DISASSEMBLY
1. Remove:
: Bearings 1
: Spacer 2
: Collar 3
Refer to "FRONT WHEEL".
SR701020
REAR WHEEL INSPECTION
1. Inspect:
: Rear wheel axle
: Rear wheel
: Rear wheel bearings
: Oil seals
Refer to "FRONT WHEEL".
2. Inspect:
: Clutch hub damper
Wear/damage ! Replace.
SR701021
REAR BRAKE INSPECTION
1. Inspect:
: Brake lining surface
Wear/damage ! Replace.
2. Measure:
: Brake lining thickness a
Out of specification ! Replace.
Brake lining thickness:
Standard:
4 mm
Limit:
2 mm
WARNING
When inspecting the brake lining, do not
spill oil or grease on the brake lining.
3. Inspect:
: Brake drum inner surface
: Oil
: Scratches
Wear/damage ! Replace.
4. Measure:
: Brake drum inside diameter a
Out of specification ! Replace.
Brake drum inside diameter:
Standard:
110 mm
Limit:
111 mm
6-25
CHAS