Rear Rack Assembly - Dynacraft SINGLE SPEED Owner's Manual

REAR RACK ASSEMBLY

Before assembling, loosen and remove all mounting bolts and nuts from mounting holes.
STEP 1
1. Place rack onto rear of bicycle
as shown above.
STEP 2
1. Position the rack against the
seatpost clamp.
2. Slide the washer onto the
mounting bolts.
3. nsert mounting bolts onto
I
clamp.
4. Securely tighten mounting bolts.
STEP 3
1. Position the rack arm against the
seat stay end.
2. Slide the washer onto the
mounting bolts.
3. Insert mounting bolts through
rack arm and then seat stay end.
4. Securely tighten the mounting
bolts.
|
50
ASSEMBLY