Front Fender Assembly - Dynacraft SINGLE SPEED Owner's Manual

FRONT FENDER ASSEMBLY FOR SHOCK FORKS
1. With front wheel off, install preassembled fender
into fork legs facing forward with fender bracket
positioned behind the fork.
|
47
ASSEMBLY
2. Slide a washer onto the mounting bolt and
insert through brake bridge and fender bracket.
Place the other washer onto the mounting bolt
and secure the mounting nut as shown above.
3. Attach fender arms (align the fender arm holes
with the mounting holes on the fork end). Then
insert the mounting bolts through the fender arm
holes to secure the bolts into the fork holes.
4. Attach front wheel (shown on page 26).