Dynacraft SINGLE SPEED Owner's Manual page 37

FIGURE 1
Bar end (5 mm Allen key)
FIGURE 2
|
29
ASSEMBLY
Shifter binder bolt
(2.5 Allen key)
Brake lever binder bolt
(5 mm Allen key)
Shift binder bolt
(Phillips head or
5 mm Allen key)
ROTATION OF SHIFTERS, BRAKE
LEVERS AND BAR ENDS
Tighten all bolts that clamp the shifter, brake
levers, and bar ends to the handlebar using a
5 mm Allen key or Phillips head screwdriver.
(figure 1) Handlebar with grip shifter.
(figure 2) Top mounted thumb shifter.
NOTE: When assembling the bicycle or
setting it up for a rider, the shifters, brake
levers and bar ends may need to be rotated
on the handlebars to a position that allows
safe and easy operation of the controls.
WARNING
Failure to properly tighten clamping bolts may
cause sudden movement of the component
resulting in loss of steering control, and serious
injury or death.