1. Manuals
  2. Brands
  3. Dynacraft Manuals
  4. Bicycle
  5. 8802-33
  6. Owner's manual

Dynacraft 8802-33 Owner's Manual

Edirt bike 24v/36v electric vehicles
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
FOR 24V/36V ELECTRIC VEHICLES
This manual contains important safety, performance and maintenance
information. Read the manual before taking your first ride on your new
ride-on vehicle, and keep the manual handy for future reference.
REGISTER
your bike online at www.dynacraftwheels.com

Advertisement

Table of Contents
loading

Related Manuals for Dynacraft 8802-33

Summary of Contents for Dynacraft 8802-33

  • Page 1 OWNER’S MANUAL FOR 24V/36V ELECTRIC VEHICLES This manual contains important safety, performance and maintenance information. Read the manual before taking your first ride on your new ride-on vehicle, and keep the manual handy for future reference. REGISTER your bike online at www.dynacraftwheels.com...
  • Page 2 DO NOT return this item to the store. STOP Questions or comments? Call Dynacraft at 1-800-288-1560 NOTE: Illustrations in this Manual are for reference purposes only and may not reflect the exact appearance of the actual product. Specifications are subject to change without notice.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Introduction, Safety and Warnings Before You Begin Assembly Electric Dirt Bike Parts Electric Dirt Bike Assembly Before You Ride Pre-Ride Checklist Detailed Maintenance and Repair Troubleshooting Guide Warranty THIS VEHICLE MUST BE ASSEMBLED BY AN ADULT. PLEASE READ THE MANUAL CAREFULLY BEFORE OPERATION.

  • Page 4: Introduction, Safety And Warnings

    INTRODUCTION, SAFETY, AND WARNINGS ABOUT THIS MANUAL: This manual was written to help you get the most performance, comfort, enjoyment and safety when riding your new electric dirt bike. It is important for you to understand your new electric dirt bike. By reading this manual before you or your child go out on your first ride, you will know how to get the most from your new electric dirt bike.
  • Page 5 Always wear appropriate clothing and shoes, including long sleeved shirts and long pants and lace-up or similar shoes with rubber soles. Never ride barefoot or in sandals and make sure that shoelaces or other fasteners are tied and kept away from the wheels and drive system of the electric dirt bike.
  • Page 6 • Always be alert and ride your electric dirt bike defensively. Watch out for obstacles that could catch one of the electric dirt bike’s wheels or force you to turn suddenly and/or lose control. Be careful to avoid pedestrians, persons using other wheeled products (including roller or in-line skates, skateboards, dirt bikes, bikes, etc.), children or animals who may enter your path.
  • Page 7 • Do not to allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drivetrain, while the engine is running. • Before each cycle of operation, the operator shall perform the pre-operation checks specified in this manual or by the manufacturer, including: .

  • Page 8: Before You Begin Assembly

    USING THE CHARGER The charger should be examined regularly for damage to the cord, plug, enclosure and other parts. In the event such damage has occurred, the electric dirt bike should not be charged until the charger has been repaired by qualified personnel or replaced.

  • Page 9: Electric Dirt Bike Parts

    ELECTRIC DIRT BIKE PARTS Part Description Part Description Handlebar Grip Control Module Variable Speed Twist Grip Throttle Footplate Handlebar Kickstand (Right/Left) Handlebar Clamps Motor (24V 250W) Brake Lever Assembly Rear Brake Number Plate Chain Front Fender Chain Guard Front Wheel Complete Chain Tensioner (Upper / Lower) Front Fork Rear Seat Fairing...

  • Page 10: Electric Dirt Bike Assembly

    ELECTRIC DIRT BIKE ASSEMBLY Required Tools Bicycle style tire pump for Schrader valve tires with pressure gauge 6mm Allen Key (not included) (included) 8mm and 10mm wrenches (not included) Phillips screwdriver Two 15mm wrenches (not included) (not included) If you experience a probelm with this product, or are missing a part, please call us at 1-800-288-1560, rather than return this product to the store.

  • Page 11: Attaching The Handlebars

    WARNING Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. WARNING In the unassembled state, this package contains small parts. Adult assembly is required. Children should not handle parts, or help in assembly of the vehicle.
  • Page 12 Attaching the Number Plate Tools required: Philips screw driver 1 Remove the three screws from the accessory kit. Align the number plate with the two holes in the front fork as shown and tighten them with a Phillips screw driver. 2 Align the hole on back of the number plate with the hole on the front fork as shown, and tighten it securely with a Phillips screw driver.

  • Page 13: Charging The Battery

    Inflating the Tires Tires are inflated before shipping, but they invariably lose some pressure between the point of manufacturing and your purchase. Using a bicycle style tire pump for a Schrader valve, inflate the tires to the PSI indicated on the sidewall of the tires.
  • Page 14 1. Turn power OFF before 2. Plug the charger into a Charger port charging. Plug the charger wall outlet. If the lights on into the charger port on the the charger do not light electric dirt bike. up, check the power to the outlet.

  • Page 15: Before You Ride

    BEFORE YOU RIDE Before you ride always check the following: Safety Gear: Always wear proper protective gear such as: · Approved safety helmet. (Helmet may be legally required by local law or regulation in your area.) · Elbow pads, knees pads and wrist guards ·...

  • Page 16: Pre-Ride Checklist

    PRE-RIDE CHECKLIST Loose Parts There should not be any unusual rattles or sounds from loose parts or broken com- ponents. If you are not sure, ask an experienced mechanic to check or call customer service Brake Check the brake for proper function. When you squeeze the lever, the brake should provide positive braking action.

  • Page 17: Detailed Maintenance And Repair

    DETAILED MAINTENANCE & REPAIR WARNING: Turn the power switch “OFF” before conducting any maintenance procedures. Testing the Brakes To use the brake, squeeze the lever to increase the pressure on the brake. The brake lever is fitted with a cable adjuster to compensate for cable stretch and/or to fine- tune the lever movement to brake engagement.

  • Page 18: Tire Replacement

    WARNING The brake could be capable of skidding the tire and causing the rider to loose control and fall or be thrown from the electric dirt bike if not applied correctly. Practice using the brake in an unobstructed, open area to become familiar with its function and until you can make smooth, controlled stops.
  • Page 19 3. With a 10mm wrench, loosen the brake cable anchor and disconnect the cable. Note: Get all the anchor hardware out of the brake arm hole and keep them together to avoid losing any parts. 4. Use two 15mm wrenches, to loosen the axle locknuts.
  • Page 20 6. Slide the chain onto the chain wheel as shown. Then slide the rear wheel axle into the slots on the rear end of the frame. (Replace with a new chain, new rear brake or a new rear wheel at this time.) 7.
  • Page 21 9. Re-attach the chain guard. Test ride and readjust as needed. Chain Tensioner Replacement Note: Use a Phillips screwdriver to remove the 3 bolts from the chain guard. 1. Lift the chain tensioner arm up. 2. Use the Phillips screwdriver to loosen (counter-clockwise) the bolt on the chain tensioner.

  • Page 22: Replacement Parts

    Battery Care and Disposal Do not store the battery in temperatures above 75°F (23.5°C) or below 32°F(0°C). THIS ELECTRIC DIRT BIKE CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS. PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: Disposal: This product contains sealed lead acid batteries which must be disposed or recycled in an environmentally safe manner.

  • Page 23: Troubleshooting Guide

    Motor or electrical switch Contact Dynacraft for repair or replacement Short run time (less than 15 minutes Undercharged battery Charge the battery. A new battery...
  • Page 24 Motor or electrical switch damage Replace with a new motor or electrical switch. Visit the Dynacraft website: www.dynacraftbike.com Electric dirt bike makes loud noises Chain is too dry Apply a lubricant such as 3 in 1 ™...

  • Page 25: Warranty

    Parents that allow their children to ride taking such actions will as- sume their own risk and the risk of injury to their children, and Dynacraft will not be responsible.
  • Page 26 SB 1918/Cal. Veh. Code, §§ 406, 407.5 (CALIFORNIA) DISCLOSURE YOUR INSURANCE POLICIES MAY NOT PROVIDE COVERAGE FOR ACCIDENTS INVOLVING THE USE OF THIS ELECTRIC DIRT BIKE. TO DETERMINE IF ANY COVERAGE IS PROVIDED, YOU SHOULD CONTACT YOUR INSURANCE COMPANY OR INSURANCE AGENT...
  • Page 27 Cal. Veh. Code, § 407.5 (CALIFORNIA) DISCLOSURE (IF APPLICABLE) YOU MAY NOT MODIFY OR ALTER THE EXHAUST SYSTEM OF THIS ELECTRIC DIRT BIKE TO CAUSE IT TO AMPLIFY OR CREATE EXCESSIVE NOISE PER VEHICLE CODE SECTION 21226, OR TO FAIL TO MEET APPLICABLE EMISSION REQUIREMENTS PER VEHICLE CODE 27156.
  • Page 28 Dynacraft Customer Service 1-800-288-1560 7AM to 4PM Pacific Standard Time DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Please have the following information available when you call: Model Number: (sample: 8802-33) Production Date: (sample: 03.03.2015)
  • Page 29 Please visit dynacraftwheels.com for more information. Or call Customer Service at 1-800-288-1560, 7AM to 4PM PST. Please have the following information available when you call: Model Number: (example: 8XXX-XX) Production Date: (example: 2014.XX.XX) Serial Number: (example: XXXXXXXXXXX) 2015 Printed in China...

Table of Contents