Final Check - Dynacraft SINGLE SPEED Owner's Manual

FINAL CHECK

Install any additional parts that are supplied with your bike.
NOTE: Your bicycle may be equipped with different style
components than the ones illustrated.
Reflectors: If not already attached, attach the reflector
mounts to the bicycle (see page 20). Mount the white
reflector on the front bracket and the red reflector on the
rear bracket by sliding the reflectors over the brackets (see
diagram, page 19) and ensure that the tab clicks into the
top hole of the bracket. It is important to make sure that all
connections are tightened securely and that the reflectors
are properly angled.
Pads: If your bike is supplied with pads, wrap the foam
inner cushion around the appropriate bar. Place the outer
cover over the inner cushion and press the Velcro together
securely. Turn the pad so the Velcro faces the ground.
Chainguards: If not already attached, attach the chainguard
to the bicycle frame using the hardware provided. Secure in
place making sure the guard does not bind or get caught on
the chain.
Tire Pressure: Check tire pressure, inflate to the range
recommended on the tire sidewalls.
CAUTION
Before riding, ensure all nuts, bolts and fittings on
the bicycle have been correctly tightened.
Rear
Reflector
(red)
Chain Guard
Front Front
Reflector Reflector
(white) (white)
|
64
ASSEMBLY