Dynacraft SINGLE SPEED Owner's Manual page 47

3. While holding the shoe against the
rim, tighten the shoe fixing nut.
4. Pass the inner cable through the inner
cable lead, making sure that the noodle
is properly seated in the outer cable lead.
Set the cable with a clearance of 1 mm
between each brake pad and the rim,
tighten the cable fixing bolt.
1 mm 1 mm
|
39
ASSEMBLY
5. Adjust the balance with the spring
tension adjustment screws.
6. Depress the brake lever about 10 times
as far as the grip to check that everything
is operating correctly and that the shoe
clearance is correct before using the brakes.