Max./Min. Insertion Mark - Dynacraft SINGLE SPEED Owner's Manual

SEATPOST MAXIMUM AND MINIMUM INSERTION MARK
Reflector
Bracket
Minimum
Insertion
Mark
Seatpost
This bike is equipped with a seatpost
which has Maximum and Minimum
Insertion Marks.
WARNING
The seatpost must be inserted so that the
Minimum Insertion Mark cannot be seen.
The quick release mechanism must be
tightened securely to prevent a sudden
shift of the seat when riding. Failure to do
this may cause loss of bicycle control and
serious injury or death.
CORRECT MAXIMUM INSERTION
Do not insert below Maximum Insertion
Mark - insertion below Maximum Insertion
Mark will block rear reflector visibility.
Use reflector bracket Minimum Insertion
Mark to confirm rear reflector visibility
Maximum Seatpost
when adjusting seatpost or reflector
Insertion Mark
bracket.
Minimum Seatpost
Insertion Mark
CORRECT MINIMUM INSERTION
Always insert
seatpost past
Minimum
Insertion Mark.
INCORRECT MAXIMUM INSERTION
Reflector visibility is blocked
by rear fender when seatpost
is inserted incorrectly.
INCORRECT MINIMUM INSERTION
Failure to insert
properly may result
in injury and
damage to bicycle.
|
32
ASSEMBLY