Table of Contents
Advertisement
Zoom Mode
You can enlarge an area of the video by pressing the
button, a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You
ZOOM
can move the rectangle around using the arrow buttons. Pressing the
mode enlarges the area in rectangle. Exit the Zoom mode by pressing the
mode, the icon
displays if Zoom is selected in the Display setup screen (OSD tab).
Spot Monitoring
You can select the camera you want to display on a Spot Monitor. Press and hold the
front panel for two seconds or longer displays the Sequence Menu.
Select the camera to be displayed on the Spot Monitor. Selecting Sequence from the menu
displays more than one camera on a Spot Monitor sequentially. Select Sequence again
to stop sequencing on the Spot Monitor. Any cameras that are Off or have lost video or
are set to Covert (unless the user has authority to view covert cameras) will be excluded
from the sequence. When the Spot Monitor is in the sequence mode, you can set the camera's
display dwell time. Refer to Chapter 3 – Configuration – Display Menu section for details.
Figure 39 ─ Sequence menu.
Active Cameo Mode
You can enter the Active Cameo mode by pressing and holding the
in any multi-view format or selecting Group Edit in the Mouse display menu. The yellow outline surrounding
the video indicates the active cameo, and pressing the arrow buttons moves the active cameo. Pressing the
(Play/Pause) button exits the Active Cameo mode. Selecting Exit Group Edit in the cameo menu displayed
when pressing the
CAMEO
in effect for 15 seconds if there is no further operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After setting
the camera number to active cameo, the DVR moves the active cameo to the next cameo. When the camera
number exists on the current screen, the active cameo is changed with the existing camera number. When
the camera number does not exist on the current screen, the active cameo is replaced by the camera number.
You can change the screen layout in this way.
Event Monitoring
When an event occurs, the DVR will display the camera associated with the event if Event Monitoring
On is selected in the Display setup screen (Main Monitor tab).
How the cameras are displayed depends on the number of cameras associated with the event. If one camera
is associated with the event, the DVR will display the camera full screen. If two to four cameras are associated
with the event, the DVR will display the cameras on a 2x2 screen. If five to nine cameras are associated
with the event, the DVR will display the cameras on a 3x3 screen. If 10 or more cameras are associated with
the event, the DVR will display the cameras on a 4x4 screen.
button also exits the Active Cameo mode. The active cameo mode will remains
button. For a few seconds after pressing the
ZOOM
(Play/Pause) button in the Zoom
ZOOM
button for two seconds or longer
CAMEO
Digital Video Recorder
button. While in the Zoom
button on the
SPOT
45
Hide quick links:
Advertisement
Table of Contents
