Table of Contents
Advertisement
Setup
Selecting
(Setup) in the Live Monitoring menu enters the Main Setup screen. Refer to Chapter 3 ─ Configuration
for detailed descriptions of system setup.
Search Mode
Selecting
(Search Mode) in the Live Monitoring menu exits the live monitoring mode and enters the search mode.
It is the same as pressing the
Login/Logout
Selecting
(Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
screen asking you to confirm whether or not you want to log out the current user.
Active Cameo Mode
You can enter the Active Cameo mode by pressing and holding the
(2x2) display format. The yellow outline surrounding the video indicates the active cameo, and pressing the arrow
buttons moves the active cameo. Pressing the
Group Edit in the cameo menu displayed when pressing the
active cameo mode will remains in effect for 15 seconds if there is no further operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera
number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the
current screen, the active cameo is changed with the existing camera number. When the camera number does not exist
on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.
Zoom Mode
You can enlarge an area of the video by pressing the
a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move the rectangle around
using the arrow buttons. Pressing the
the Zoom mode by pressing the
the Display setup screen (OSD tab).
PTZ Mode
If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will control
cameras with Pan, Tilt and Zoom capabilities. Press and hold the
the PTZ camera menu and enter the PTZ mode, and press the button again to exit the PTZ mode.
Select the PTZ camera you wish to control by selecting it from the menu. The icon
screen.
To use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press
the Up and Down arrow buttons to tilt the camera up and down. Press the
and press the
You can establish preset positions for PTZ cameras. Press the
You can quickly move PTZ cameras to Preset positions. Press the
Preset position.
Figure 70 — PTZ Select Camera menu.
button.
PLAYBACK
(Play/Pause) button exits the Active Cameo mode. Selecting Exit
ZOOM
(Play/Pause) button in the Zoom mode enlarges the area in rectangle. Exit
button. While in the Zoom mode, the icon
ZOOM
button to zoom out. You can use the
4-Channel Digital Video Recorder
(Logout) in the Live Monitoring menu displays the Logout
button for three seconds or longer in quad
CAMEO
button also exits the Active Cameo mode. The
CAMEO
button. For a few seconds after pressing the
displays if Zoom is selected in
button for three seconds or longer to display
PTZ
and
button,
ZOOM
displays on the PTZ camera
button to zoom in,
buttons to focus the image.
to establish Presets.
to view an established camera
57
Advertisement
Table of Contents
