Active Cameo Mode; Zoom Mode; Ptz Mode; Figure 40: Ptz Select Camera Menu - PACOM PDR960H-4E User Manual

User's Manual

Active Cameo Mode

You can enter the Active Cameo mode by selecting Edit Group from the Live Monitoring – Camera menu or pressing
and holding the (Play/Pause) button for three seconds or longer in any multi-view format. The yellow outline
surrounding the video indicates the active cameo, and pressing the arrow buttons moves the active cameo. Selecting
Exit Group Edit in the cameo menu displayed when pressing the
active cameo mode will remains in effect for 15 seconds if there is no further operation.
In active cameo mode, press the button for the camera you want to display in the active cameo. After setting the camera
number to active cameo, the DVR moves the active cameo to the next cameo. When the camera number exists on the
current screen, the active cameo is changed with the existing camera number. When the camera number does not exist
on the current screen, the active cameo is replaced by the camera number. You can change the screen layout in this way.

Zoom Mode

You can enlarge an area of the video by pressing the
the button, a rectangle displays on the screen. A rectangle shows the area that will be enlarged. You can move
ZOOM
the rectangle around using the arrow buttons. Pressing the
in rectangle. Exit the Zoom mode by pressing the
is selected in the Display setup screen (OSD tab).

PTZ Mode

If a user who has PTZ Control authority logs into the system, the user can control PTZ cameras. The DVR will control
cameras with Pan, Tilt and Zoom capabilities. Press and hold the
longer to display the PTZ camera menu and enter the PTZ mode, and press the button again to exit the PTZ mode.
Select the PTZ camera you wish to control by selecting it from the menu. The icon
To use the front panel buttons, press the Left and Right arrow buttons to pan left and right. Press
the Up and Down arrow buttons to tilt the camera up and down. Press the
and press the

Figure 40: PTZ Select Camera menu.

< Set Preset > < Move to Preset >

Figure 41: PTZ Preset menu.

56
button on the front panel. For a few seconds after pressing
ZOOM
(Play/Pause) button in the Zoom mode enlarges the area
button. While in the Zoom mode, the icon
ZOOM
button to zoom out. You can use the
You can save camera position settings as "presets" so that you can go directly
to desired views.
Once you have the camera at the desired settings, press the
on the front panel. Select Set Preset from the Move to Preset dialog box,
and the PTZ Preset dialog box will appear. Select the number you want to
assign to the preset and press the
keyboard to enter the preset name.
Press the button on the front panel to load the PTZ preset, and the
SEARCH
Move to Preset dialog box will appear. Select the desired preset and press
the button to load the preset.
button also exits the Active Cameo mode. The
button on the front panel for three seconds or
PTZ
displays on the PTZ camera screen.
and buttons to focus the image.
(Play/Pause) button. Use the virtual
displays if Zoom
button to zoom in,
button
SEARCH