System Menu Options And Parameters - Radyne DMD2401 Operation Manual

User Interfaces

4.2.7 System Menu Options and Parameters

Control Mode:
General (menu):
Date:
Time:
Backlight (menu):
Level:
Timeout:
Key Click:
F0XXXXNN:
Firmware Rev. (menu):
FPGA #1:
FPGA #2:
Tx CPLD:
Rx CPLD:
Intf CPLD:
Intf TxDSP:
Intf RxDSP:
4-20
DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
{Front Panel, Terminal, Computer}
Allows the user to select the active control source.
{YY MMM DD}
Displays, and allows the user to enter the current date.
{HH:MM:SS}
Displays, and allows the user to enter the current time.
{High, Low}
Allows the user to enter the backlight intensity level.
{00 - 99}
Allows the user to enter the length of time in seconds of
keyboard inactivity before the backlight shuts off. 00 =
no timeout.
{On, Off}
Allows the user to enable/disable the audible click heard
each time a key is pressed.
Version X-X
Displays the current firmware revision (where F0XXXX is
the Radyne ComStream part number, and NN is the
Radyne ComStream revision number).
{F0XXXXNN, Not Present}
Indicates whether or not the firmware (where F0XXXX is
the Radyne ComStream part number, and NN is the
Radyne ComStream revision number) is present.
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
{F0XXXXNN, Not Present}
Indicates whether the firmware is present.
TM065 – Rev. 3.3