System Menu Options And Parameters - Radyne DMD20 Installation And Operation Manual

DMD20/20LBST Universal Satellite Modem
IDR1 SAT ALARM 3
IDR1 SAT ALARM 4
IBS SAT ALARM
T1E1 SATTERR ALM
SAT MAP SUMMARY
NOTE:The following alarms identify the control status of the alarms transmitted to the
distant satellite end.
IDR1 SAT CNTRL
IDR2 SAT CNTRL
IDR3 SAT CNTRL
IDR4 SAT CNTRL
IBS SAT CNTRL
T1E1 TERR CNTRL
IBS TX PROMPT
IBS TX SERVICE

4.4.7 System Menu Options and Parameters

DATE (MM/DD/YY)
TIME {HH:MM:SS}
CONFIG COPY
MN-DMD20-20LBST Revision 14
{PASS, FAIL}
{PASS, FAIL}
{PASS, FAIL}
{PASS, FAIL}
{NONE, BK 1; BK 2; BK 1&2; BK 3; BK 1&3; BK 2&3; BK
1&2&3; BK 4; BK 1&4; BK 2&4; BK 1&2&4; BK 3&4; BK
1&3&4; BK 2&3&4; BK 1&2&3&4}
Summary alarm is given when criteria meets the selection
above.
{STNDRD, FRC ON, FRC OFF}
STNDRD: Set Alarm functions in a normal configuration
FRC ON: Forces an ON alarm status that is transmitted to the
distant end.
FRC OFF: Forces an OFF alarm status that is transmitted to the
distant end.
{STNDRD, FRC ON, FRC OFF}
{STNDRD, FRC ON, FRC OFF}
{STNDRD, FRC ON, FRC OFF}
{STNDRD, FRC ON, FRC OFF}
{STNDRD, FRC ON}
{STNDRD, FRC ON}
{STNDRD, FRC ON}
Allows the user to enter the current date.
Allows the user to enter the current time.
{Current, CFG1......CFG10}
Allows user to copy, save and recall modem configurations.
User Interfaces
4–36