Table of Contents
Advertisement
DMD50 Universal Satellite Modem
T1E1 TERR CNTRL
IBS TX PROMPT
IBS TX SERVICE
4.3.8 System Menu Options and Parameters
DATE (MM/DD/YY)
TIME {HH:MM:SS}
CONFIG COPY
FRONT PANEL (menu)
BKLT LEVEL
BKLT TIMEOUT
KEY CLICK
MENU NAVIGATION
LED TEST
REMOTE CONTROL
TERMINAL (menu)
TYPE
BAUD RATE
TM118 – Rev. 1.1
{STNDRD, FRC ON}
{STNDRD, FRC ON}
{STNDRD, FRC ON}
Allows the user to enter the current date.
Allows the user to enter the current time.
{Current, CFG1......CFG10}
Allows user to copy, save and recall modem
configurations.
{OFF, LOW, MED, HIGH}
Allows the user to enter the backlight intensity level.
{00 - 99}
Allows the user to enter the length of time (in seconds)
of keyboard inactivity before the backlight shuts off. 00
= no timeout.
{ON, OFF}
Allows the user to enable or disable the audible beep
each time a key is pressed. Illegal entries will still cause
a beep to be heard.
{STANDARD, FLOATING}
Standard: This setting has a fixed starting point for all
sub-menus.
Floating: Sub-menus are floating, always returning to
the last menu that was accessed.
{ENTER}
Allows user to test all front panel LEDs.
{TERMINAL, COMPUTER}
Allows the user to select between terminal RS-232
control and remote port M&C RS-232/-485 control.
{VT-100, WYSE50, VIEWPOINT}
Allows the user to select the emulation type.
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600}
Allows the user to enter the terminal baud rate.
User Interfaces
4-31
Advertisement
Table of Contents
