Radyne DMD2401 Operation Manual page 52

DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
SigLoss Mask:
FrmSync Mask:
MFrmSync Mask:
IFSynth Mask:
BuffPLL Mask:
RxLevel Mask:
Rx FPGA Mask:
Rx Force:
Minor Tx (menu):
Tx Activity (menu):
TerrClk Mask:
Int Clk Mask:
BNC Clk Mask:
TxSatCk Mask:
Tx Data Mask:
TerrAIS Mask:
TM065 - Rev. 3.3
{Pass/Fail, No/Yes}
Indicates that the Demodulator is unable to lock to a
signal.
{Pass/Fail, No/Yes}
Indicates that the framing unit is unable to find the
expected framing pattern.
{Pass/Fail, No/Yes}
{Pass/Fail, No/Yes}
Indicates the Rx IF Synthesizer is not locked. This alarm
will flash 'On' during certain modem parameter changes.
{Pass/Fail, No/Yes}
Indicates that the Buffer Clock PLL is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail, No/Yes}
This alarm indicates that the Receive Automatic Gain
Control is saturated (i.e., too much signal power is being
supplied to the modem).
{Pass/Fail, No/Yes}
This alarm indicates that a Receive FPGA Hardware
Fault has occurred.
{Pass/Fails}
Allows a Major Rx Alarm to be forced (for testing
purposes, etc.).
{Pass/Fail, No/Yes}
Indicates no Terrestrial Clock activity.
{Pass/Fail, No/Yes}
Indicates no SCT Clock activity.
{Pass/Fail, No/Yes}
Indicates no activity on the External BNC Clock.
{Pass/Fail, No/Yes}
Indicates on TX Sat Clock activity.
{Pass/Fail, No/Yes}
Indicates no Tx Data activity.
{Pass/Fail, No/Yes}
Indicates that AIS has been detected in the Terrestrial
Data Stream.
User Interfaces
4-13