Table of Contents
Advertisement
DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
<1>
Latched Alarm 1
Major Alarm
<1>
Latched Alarm 2
Minor Alarm
<1>
Latched Common
Alarm
<1>
Online Flag
<1>
+5V Voltage
<1>
+12V Voltage
<1>
-12V Voltage
<2>
Temperature
<4>
Reserved
TM065 - Rev. 3.3
Bit 1 = +12 V Alarm
Bit 2 = +5 V Alarm
Bit 3 = Temperature Fault
Bit 4 = Interface FPGA
Bit 5 = Battery Fault
Bit 6 = RAM/ROM Fault
Bit 7 = Spare
(0 = Pass, 1 = Fail)
Bit 0 = Transmit Processor Fault Major Alarm
Bit 1 = Transmit Output Power Level Fault
Bit 2 = Transmit Oversample PLL Lock Fault
Bit 3 = Composite Clock PLL Lock Fault
Bit 4 = IF Synthesizer Lock Fault
Bit 5 = Transmit FPGA Configuration Fault
Bit 6 = Transmit Forced Alarm
Bit 7 = External Reference PLL Lock Fault
(0 = Pass, 1 = Fail)
Bit 0 = Terrestrial Clock Activity Detect Fault Minor Alarm
Bit 1 = Internal Clock Activity Detect Fault
Bit 2 = Tx Sat Clock Activity Detect Fault
Bit 3 = Tx Data Activity Detect Fault
Bit 4 = Terrestrial AIS (Tx Data AIS Detect Fault)
Bit 5 = Transmit Ext BNC Clock Activity Detect Fault
Bit 6 = Transmit Reed-Solomon Fault
Bit 7 = Tx BUC Fault, LBST Only
(0 = Pass, 1 = Fail)
Bit 0 = -12 V alarm
Bit 1 = +12 V alarm
Bit 2 = +5 V alarm
Bit 3 = Temperature Fault
Bit 4 = Interface FPGA Fault
Bit 5 = Battery Fault
Bit 6 = RAM / ROM Fault
Bit 7 = Spare
(0 = Pass, 1 = Fail)
0 = Offline, 1 = Online
+5 V, Implied Decimal Point (ex: 49 = +4.9 V)
+12 V, Implied Decimal Point (ex: 121 = +12.1 V)
-12 V, Implied Decimal Point and Minus Sign
(ex: 118 = -11.8 V)
Degrees C, Implied Decimal Point (ex: 490 = 49.0 C)
(Temperature is measured at the output amplifier, and does
not represent the overall internal temperature)
Ignore These Bytes
Note: The following three bytes apply only if an
asynchronous interface card, IDR or IBS interface card is
installed, and the AUPC option is installed and the AUPC
is enabled. If not, ignore this byte.
User Interfaces
4-53
Advertisement
Table of Contents
