Radyne DMD2401 Operation Manual page 105

User Interfaces
Opcode: <2610h>
<1> Reed-Solomon
<1> Reed-Solomon N
<1> Reed-Solomon K
<1> Reed-Solomon T
<1> RS Interleaver
Depth
Opcode: <2611h>
<1> Spectrum
Opcode: <2612h>
<1> Operating Mode
Opcode: <2613h>
<1> Scrambler
Control
Opcode: <2614h>
<1> Scrambler Type
Opcode: <2617h>
<1> Terrestrial
Loopback
Opcode: <2618h>
<1> Baseband
Loopback
Opcode: <2623h>
<1> Data Invert
4-66
DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
Command a Modulator's Reed-Solomon Encoder Characteristics
0 = Disable, 1 = Enable
Unsigned Binary
Unsigned Binary
Note: Always set to Zero; as the T value is calculated
from N and K.
Unsigned Binary, 4 or 8
Command a Modulator's Spectrum
0 = Normal, 1 = Inverted
Command a Modulator's Operating Mode
0 = Normal, 1 = 2047 Test
Command a Modulator's Scrambler Control
0 = Off, 1 = On
Command a Modulator's Scrambler Type
0 = None
1 = IBS Scrambler
2 = V.35_IESS
3 = V.35_CCITT
4 = V.35_EFDATA
7 = Reed-Solomon Scrambler
8 = V35_EFRS
Command a Modulator's Terrestrial Loopback
0 = Disable, 1 = Enable
Command a Modulator's Baseband Loopback
0 = Disable, 1 = Enable
Command a Modulator's Data Invert
0 = Normal, 1 = Inverted
TM065 – Rev. 3.3