Radyne DMD2401 Operation Manual page 54

DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
UnCWord Mask:
IBS Alarms (menu):
Prompt Mask:
Service Mask:
BER Mask:
Common (menu):
-12Volt Mask:
+12Volt Mask:
+5Volt Mask:
Temp Mask:
IntFPGA Mask:
Battery Mask:
RAM/ROM Mask:
M&CProc Mask:
Ref PLL Mask:
Ext EXC Mask:
Ext Ref Mask:
D Card Mask:
TM065 - Rev. 3.3
{Pass/Fail, No/Yes}
Indicates the status of the Reed-Solomon uncoded word
fault.
{Pass/Fail, No/Yes}
Indicates that a Prompt Maintenance Alarm is generated
as defined in Rec. ITU-T6.803.
{Pass/Fail, No/Yes}
Indicates that a Service Alarm is generated as defined in
Rec. ITU-T6.803.
{Pass/Fail, No/Yes}
Fail indicates a BER of 1 x 10
input.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Fail indicates that internal temperature of the modem is
out of range.
{Pass/Fail, No/Yes}
Indicates a hardware failure on the Interface Card.
{Pass/Fail, No/Yes}
Indicates that the Internal Clock Battery is low.
{Pass/Fail, No/Yes}
Indicates an M&C Memory fault.
{Pass/Fail, No/Yes}
Indicates an M&C Microprocessor hardware failure.
{Pass/Fail, No/Yes}
Indicates that the External Reference PLL is not locked.
{Pass/Fail, No/Yes}
Indicates that the External Clock is not active.
{Pass/Fail, No/Yes}
Indicates no activity on the External Reference.
{Pass/Fail, No/Yes}
Indicates a failure on the Daughter Card.
User Interfaces
-3
or greater from satellite
4-15