Table of Contents
Advertisement
User Interfaces
TxAnsync Port:
Tx G703 Intf:
Tx Univ Intf:
Tx D&I (menu):
Drop Mode:
Rx Setup (menu):
Rx Ckt ID:
Buff Size:
Buff Clk:
Clk Polarity:
Rx Terr Intf:
Asynchronous:
Rx Async Port:
Rx G703 Intf:
Rx Univ Intf:
4-10
DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
{RS-485, RS-232}
Allows the user to select the Transmit Async Port type.
{U.E1, B.E1, B.T1.B8ZS, B.T1.AMI}
Allows the user to select the Transmit G.703 Interface
type.
{V.35, RS-422, RS-232, U.E1, B.E1, B.T1, B8ZS, BT1.AMI}
Allows the user to select the Transmit Universal Interface
Type.
{Enable, Disable}
E1 Mode:
PCM30, PCM30C, PCM31, PCM31C.
T1 Mode:
T1-D4, T1-ESF, T1-D4-S, T1-ESF-S
Allows the user entry of an Rx Circuit Identifier. Circuits
can be given up to an 11 character alphanumeric identity
such as LINK1.
{1 – 128}
Sets the Doppler Buffer Size in msec. Only available
when no Optimal Interface is installed.
{SCTE (Ext), SCT (Int), Rx Sat}
Selects the Buffer Clock source.
{Normal, Inverted}
Selects the Buffer Clock polarity.
{RS-422, V.35, RS-232}
Allows the user to select the Transmit Interface Type.
Not available when G.703 Interface Type is installed.
{Off, On}
{RS-485, RS-232}
Allows the user to select the Receive Async Port type.
{U.E1, B.E1, B.T1.B8ZS, B.T1.AMI}
Allows the user to select the Receive G.703 Interface
type.
{V.35, RS-422, RS-232, U.E1, B.E1, B.T1, B8ZS, BT1.AMI}
Allows the user to select the Receive Universal Interface
Type.
TM065 – Rev. 3.3
Advertisement
Table of Contents
