System Menu Options And Parameters - Radyne DMD20 Installation And Operation Manual

DMD20/DMD20 LBST Universal Satellite Modem

4.3.8 System Menu Options and Parameters

DATE (MM/DD/YY)
TIME {HH:MM:SS}
CONFIG COPY
FRONT PANEL (menu)
BKLT LEVEL
BKLT TIMEOUT
KEY CLICK
REMOTE CONTROL
TERMINAL (menu)
TYPE
BAUD RATE
REMOTE PORT (menu)
ADDRESS
BAUD RATE
INTERFACE
TM103 – Rev. 2.5
Allows the user to enter the current date.
Allows the user to enter the current time.
{Current, CFG1......CFG10}
Allows user to save and copy modem configurations.
{OFF, LOW, MED, HIGH}
Allows the user to enter the backlight intensity level.
{00 - 99}
Allows the user to enter the length of time (in seconds)
of keyboard inactivity before the backlight shuts off. 00
= no timeout.
{ON, OFF}
Allows the user to enable or disable the audible beep
each time a key is pressed. Illegal entries will still cause
a beep to be heard.
{TERMINAL, COMPUTER}
Allows the user to select between terminal RS-232
control and remote port M&C RS-232/-485 control.
{VT-100, WYSE50, VIEWPOINT}
Allows the user to select the emulation type.
{150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600}
Allows the user to enter the terminal baud rate.
{32 - 255}
Allows the user to enter the Remote Port Multidrop
Address.
{150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38,400}
Allows the user to enter the Remote Port Baud Rate.
{RS-232, RS-485}
Allows the user to enter the Remote Port interface type.
User Interfaces
4-33