Radyne DMD2401 Operation Manual page 58

DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
+12Volt Mask:
+5Volt Mask:
Temp Mask:
IntFPGA Mask:
Battery Mask:
RAM/ROM Mask:
M&CProc Mask:
Ref PLL Mask:
Ext EXC Mask:
Ext Ref Mask:
D Card Mask:
Backward Alr (menu):
RxBack Mask:
TxBack Mask:
Force Back:
Clear Alarms
TM065 - Rev. 3.3
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Indicates the power supply voltage is out of range.
{Pass/Fail, No/Yes}
Fail indicates that internal temperature of the modem is
out of range.
{Pass/Fail, No/Yes}
Indicates a hardware failure on the Interface Card.
{Pass/Fail, No/Yes}
Indicates that the Internal Clock Battery is low.
{Pass/Fail, No/Yes}
Indicates an M&C Memory fault.
{Pass/Fail, No/Yes}
Indicates an M&C Microprocessor hardware failure.
{Pass/Fail, No/Yes}
Indicates that the External Reference PLL is not locked.
{Pass/Fail, No/Yes}
Indicates that the External Clock is not active.
{Pass/Fail, No/Yes}
Indicates no activity on the External Reference.
{Pass/Fail, No/Yes}
Indicates a failure on the Daughter Card.
{Pass/Fail, No/Yes}
Indicates that the modem is receiving an Rx Alarm from
the modem that is receiving its data.
{Pass/Fail, No/Yes}
Indicates that the modem is receiving an Tx Alarm from
the modem that is supplying its data.
{Normal, Alarm On, Alarm Off}
Indicates the state of the Backward Alarm.
{Ent = Y, Clr = N}
Clears all Latched Alarms.
User Interfaces
4-19