Radyne DMD2401 Operation Manual page 56

DMD2401/DMD2401L/DMD2401 IBS/IDR Satellite Modem
BuffPLL:
RxLevel:
Rx FPGA:
Minor Tx (menu):
Tx Activity (menu):
TerrClk:
Int Clk:
BNC Clk:
TxSatCk:
Tx Data:
TerrAIS:
RS FIFO:
Minor Rx (menu):
BufUFlw:
BufOFlw:
Buf<10%:
Buf>90%:
TM065 - Rev. 3.3
{Pass/Fail}
Indicates that the Buffer Clock PLL is not locked. This
alarm will flash 'On' during certain modem parameter
changes.
{Pass/Fail}
This alarm indicates that the Receive Automatic Gain
Control is saturated (i.e., too much signal power is being
supplied to the modem).
{Pass/Fail}
This alarm indicates that a Receive FPGA Hardware
fault has occurred.
{Pass/Fail}
Indicates no Terrestrial Clock activity.
{Pass/Fail}
Indicates no SCT Clock activity.
{Pass/Fail}
Indicates no activity on the External BNC Clock.
{Pass/Fail}
Indicates no Tx Sat Clock activity.
{Pass/Fail}
Indicates no Tx Data activity.
{Pass/Fail}
Indicates that AIS has been detected in the Terrestrial
Data Stream.
{Pass/Fail}
Indicates the status of the Tx Reed-Solomon FIFO.
{Pass/Fail}
Indicates that a Doppler Buffer underflow has occurred.
{Pass/Fail}
Indicates that a Doppler Buffer overflow has occurred.
{Pass/Fail}
Indicates that the Doppler Buffer has gone below 10%
full and may underflow.
{Pass/Fail}
Indicates that the Doppler Buffer has gone above 90%
full and may overflow.
User Interfaces
4-17