Ac Input Voltage Specifications - Compaq AlphaServer GS60E Installation Manual

4. Check that the receptacle provided is correct. This should have been done
during site preparation (see Chapter 1).
5. Using a voltmeter, measure the voltages between lines in the receptacle as
shown in Figure 6-2. Verify that the voltages are within the range specified
in Table 6-2. If the voltages are out of range, contact an electrician.
6. Plug the power cord into the receptacle.
Table 6–1 AC Input Voltage Specifications
202V Nominal
Voltage junction
Measurement ground
Line to line 202
Line to 0, 202, 202
ground
202V Nominal
mid-point
ground 208V Nominal
202 208
101, 101, 175 120
Powering Up the System
380–415V
Nominal
380–415
220–240
6-5