Compaq AlphaServer GS60E Installation Manual page 99

Hide thumbs Also See for AlphaServer GS60E:

Table of Contents

Enter set boot_reset on to initialize the system before booting.

If you boot from the same boot device each time, you can store the disk

name by defining the default boot device. This is done by using the set

bootdef_dev command. The default boot device is used for booting during

power-up and auto restarts.

Use set boot_osflags to define the boot command flag parameters of 0, 6.

Note the flags shown here are for OpenVMS; UNIX uses different flags.

Booting can now be done from that device by typing boot or just b.

NOTE: Refer to the Operations Manual for more information on set commands

and environment variables.

Diagnostics and Utilities

8-25

Table of Contents

Need help?

Do you have a question about the AlphaServer GS60E and is the answer not in the manual?