Compaq AlphaServer GS60E Installation Manual page 13

In general, the procedure is as follows (Figure 1-1):
1. Prepare the site for system installation as described in Chapter 2.
2. Install the system cabinet as described in Chapter 3.
3. If the system has one or more expander cabinets, refer to Chapter 4 for
installation instructions.
4. Connect the console, and, if appropriate, make the Ethernet, and SCSI
connections as described in Chapter 5.
5. Power up the system as described in Chapter 6.
6. Observe and consider the results of the system self-test as described in
Chapter 7.
7. Verify system operation by running various diagnostics and utilities as
described in Chapter 8.
Installation Overview 1-3