Booting Factory Installed Software - Compaq AlphaServer GS60E Installation Manual

8.8

Booting Factory Installed Software

The factory installs the operating system ordered by the customer.
After determining that all devices are seen by the console, you will
want to know where the operating system is installed and then boot it.
Example 8–6 Booting the Operating System
P00>>> show bootdef_dev
bootdef_dev
P00>>> show boot_osflags
boot_osflags
or
boot_osflags
P00>>> boot
Building FRU table. . . . . . . . . .
(boot dka200.2.0.0.0
SRM boot identifier: scsi
boot adapter: isp0 rev 0 in bus slot 0 off of kftia0 in TLSB slot 8
block 0 of dka200.2.0.0.0 is a valid boot block
reading 1018 blocks from dka200.2.0.0.0
bootstrap code read in
base = 200000, image start = 0, image_bytes = 7f400
initializing HWRPB at 2000
initializing page table at 1f2000
initializing machine state
setting affinity to the primary cpu
jumping to bootstrap code
OpenVMS Alpha Operating System, Version V7.1-2
8-18 AlphaServer GS60E Installation Guide
dk200.2.0.2.0
0 [for OpenVMS]
a [for UNIX]
-flags 0,0)
0 0 0 2 200 ef00 10201077