Compaq AlphaServer GS60E Installation Manual page 43

1. Use an adjustable wrench to lower and adjust the leveler feet. A shipping
bracket can also be used to adjust the leveler feet, since the bracket cutout
and leveler feet hexnuts are the same size.
2. Use a bubble level while adjusting the feet and make sure all cabinets are
properly leveled in three dimensions (top to bottom, side to side, and front to
back). The operation is complete when the tops are level and the sides of
the cabinet are snug, top to bottom, front to back.
3. Once the cabinets are level, lock each of the feet into place by tightening the
locknut at the top of each leveler foot.
Installing an Expander Cabinet 4-7