Safety Instructions; General Information; Transport; Installation - Wexiodisk WD-6 Installation And User Manual

Safety instructions

2. Safety instructions

2.1 General information

The machine is CE marked, which means that it complies with the requirements
of the EU machinery directive with regard to product safety. Product safety means
that the design of the machine will prevent personal injury or damage to property.
Modifying the equipment without the approval of the manufacturer invalidates the
manufacturer's product liability.
To further improve safety during installation, operation and servicing, the operator
and the personnel responsible for installing and servicing the machine should
read the safety instructions carefully.
Switch off the machine immediately in the event of a fault or malfunction. The ma-
chine must only be serviced by trained engineers. The regular checks described
in the manual must be carried out in accordance with the instructions. The ma-
chine must be serviced by a person authorised to do so by the manufacturer. Use
original spare parts. Contact an authorised service company to draw up a pro-
gramme of preventative maintenance. Dangerous situations may arise if the in-
structions above are not followed.
Before using the machine, ensure that personnel are given the necessary training
in operating and maintaining the machine.

2.2 Transport

Handle the machine with care during unloading and transport to avoid the risk of
it tipping over. Never lift or move the machine without using the wooden packag-
ing to support the stand.

2.3 Installation

The electrical cabinet must only be opened by an authorised electrician. The ma-
chine is sensitive to electrostatic discharge (ESD), which is why a static electricity
wristband must be used when handling the electronics.
The water connections must only be put in place by qualified technicians.
Water pipes must be connected in a way that complies with the current regula-
tions of the local water supply authority. Check that the water connections do not
leak before starting the machine.
Make sure that the mains voltage is the same as that indicated on the machine's
rating plate. The machine should be connected to a lockable mains switch.
WD-6
3
Rev. 4,0 (201302)