Space For Servicing; Transport And Storage; Unpacking; Recycling The Packaging - Wexiodisk WD-6 Installation And User Manual

Installation

3.2.4 Space for servicing

3.3 Transport and storage

3.3.1 Unpacking

3.3.2 Recycling the packaging

A 1-metre area should be left clear in front of the machine for servicing purposes.
Always transport the machine in an upright position.
Take care during transport, as there is a risk of the machine tipping over.
NOTE: The machine must not be transported without a pallet or other support,
otherwise the machine may become damaged. When transporting the machine
without a normal wooden pallet, always check that none of the components un-
derneath the machine can be damaged.
A
A=Wooden pallet
If the machine is not being installed immediately, it must be stored in a frost-free
area where the air is dry.
Remove the packing material. Inspect the machine for any transport damage.
Check that all parts have been delivered by comparing them with the delivery slip.
Packaging must be disposed of or recycled in accordance with local regulations.
WD-6
WD9_08
7
Rev. 4,0 (201302)