Wexiodisk WD-6 Installation And User Manual page 33

Hood type dishwasher
Table of Contents

Advertisement

Instructions for use
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
WD-6
Symbol for washing function. After the machine is started, the symbol lights
up when the tank is full. The symbol flashes if the water level in the tank is
too low.
Display for temperature during operation. When checking and setting ref-
erence values, the display shows the number for the relevant reference val-
ue, e.g. 01, 02, 03 etc. Error messages appear on the other display (4).
Final rinse indicator. The symbol is lit while the machine is filling up, during
the final rinse phase and when the cleaning programme is run after a com-
pleted washing cycle. The symbol flashes if the hood is opened during the
washing cycle or if the final rinse water has not reached the correct rinse
temperature when the rinsing phase is due to start. The machine continues
washing until the correct rinse temperature has been reached.
Display showing the programme during operation, which counts down the
remaining washing time.
Button for closing or opening the hood. (On machines with an automatic
hood lift.)
Button for washing programme P1. When the machine is in service mode,
P1 is used to show the different reference values and to reset the reference
values to the last saved values. If the machine has a drain pump, P1 is
used to start the drain pump and empty the tank after washing.
Button for washing programme P2. P2 is used in service mode to increase
a reference value or move between tables. In shut-off mode the software
version number can be displayed by holding down P2.
Button for washing programme P3. P3 is used in service mode to reduce a
reference value or move between tables. P3 is used in shut-off mode to
start internal rinsing when the cleaning programme is used to clean the ma-
chine.
Button to switch the power on or off. This button is also used to reset
alarms, display the water flow to the machine and to move to service mode.
Rinse nozzle
"Autostart" (if the machine has this option, the hood is closed automatically
when a basket is loaded in the machine.)
Tank filter
Level pipe (has been replaced by a bottom filter if the machine is connected
to a WD-PRM 6)
Rubber sleeve
Drain filter (on machines with a drain pump).
Pump filter
Washing and rinsing arm
Wash nozzle
Condensing battery (option)
Heat exchanger (option)
29
Rev. 4,0 (201302)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents

Save PDF