Wexiodisk WD-6 Installation And User Manual page 36

Instructions for use
Changing the values – Selecting service mode
The machine must be set to service mode when the operator needs to change a
value. This is done using the control panel. The values that can be changed flash.
The displays and buttons have different functions than when the machine is in
normal operating mode.
The panel's functions in service mode
1.
2.
3.
4.
5.
6.
7.
8.
9.
WD-6
C
1
P1
P2
P3
Symbol for washing function.
Display for the table numbers and the row numbers of each table.
Symbol for final rinse.
Display of values and other information for all the row numbers in the ta-
bles.
Button for opening/closing the hood. (On machines with an automatic
hood.)
Use the P1 button to move between the table rows or to reset the values to
those last saved.
Use the P2 button to increase a value or move forwards between the ta-
bles.
Use the P3 button to reduce a value or move backwards between the ta-
bles.
Use the 0/1 button to enter or exit service mode.
WD-6
2
3
4
5
6
7
8
9
301060_6
32
Rev. 4,0 (201302)