Installation; Positioning The Machine - Wexiodisk WD-6 Installation And User Manual

Installation

3.4 Installation
Check that the overheating protection on the booster heater is set to zero.
If holes need to be made in the machine, each hole must be fitted with an edge
strip or similar protection.

3.4.1 Positioning the machine

Put the machine in position and check that it is horizontal using a spirit level. Place
the spirit level on the join between the machine tank and the hood. Once the ma-
chine has been filled with water, check that it is level.
If the machine is to be corner-loaded, it must be positioned with the control panel
furthest away from the wall.
Adjust the height using the machine's legs. The machine even can be furnished
with extensions leg (35mm).
WD-6
8
Rev. 4,0 (201302)