Barcode Reader Settings - CipherLab 9600 Reference Manual

7.2 BARCODE READER SETTINGS

The barcode reader configurations depend on the scan engine(s) installed. You can tell
which reader is currently in use and make necessary changes on the General tab.
Barcode Reader
CCD/Laser Reader
2D Reader
Description
If installed, tap the [Barcode Reader] button to configure the reader settings
for CCD or Laser scan engine.
Refer to the Reader Settings Table in
Laser (SE950).
The 2D scan engine is capable of reading linear and 2D barcodes.
If installed, tap the [Barcode Reader] button to configure the reader settings
for 2D scan engine.
Refer to the Reader Settings Table in
Chapter 7 Using Reader Configuration Utility
Appendix II - Linear Imager (CCD),
Appendix III - 2D Imager.
129