Use Wi-Fi; Turn On Wi-Fi Power; Main Settings - CipherLab CP60 Reference Manual

CP60 Mobile Computer

5.2. USE WI-FI

The mobile computer is capable of Wi-Fi, a wireless networking technology making use of an
access point, also known as "hotspot", to connect to a wireless local area network.
To use Wi-Fi, the mobile computer has to connect to a hotspot. Some hotspots are open for
connection while others request a key to authenticate access. If this is the case, the
authentication key must be included in the mobile computer's Wi-Fi settings.
For authentications based on secure certificates, see
Wi-Fi settings can be modified using Summit Client Utility. However, Windows Zero
Configuration also plays a part in controlling Wi-Fi power status.
Turn off Wi-Fi when it isn't used to extend battery life. See
Profile settings are radio and security settings that are stored in the registry as part of a
configuration profile. When a profile is selected as the active profile, the settings for the
profile become active. You may create, rename, edit, and delete profiles, as well as alter
global settings that apply to every profile or to Summit Client Utility (SCU) itself. For more
details on profile settings, please go to the following websites:
http://www.summitdata.com/documentation.html
http://www.summitdata.com/Documents/summit_users_guide_3_03.html
http://www.summitdata.com/Documents/summit_quick_start_v3_03.html

5.2.1. TURN ON WI-FI POWER

Before setting Wi-Fi connection, power to the Wi-Fi module must be turned on. This can be
done through the Windows Zero Configuration.
To turn on Wi-Fi power:
1) On Start screen, tap Settings | Connections | Wireless Manager
Wireless Manager opens.
2) Make sure the Wi-Fi bar is set as open. If not, tap the bar to turn it on.
Note: If the Wi-Fi- power is not turned on at Windows Zero Configuration, the Summit Client
Utility will display "Externally Disabled" under "Status".
5.2.2. LAUNCH SCU
Wi-Fi settings can be adjusted with Summit Client Utility. Within this application are five
tabbed pages which allow users to select the access point for connection, create profiles for
better management, perform diagnostics on connectivity, and fine-tune property settings
to meet their individual requirements.
To launch SCU:
1) On Start screen, tap Settings | System | SCU
SCU opens showing five tabbed pages: Main, Profile, Status, Diags, Global.
The following sections explicate in detail the settings on each of these pages.
130
Install Secure Certificates.
Turn on Wi-Fi
.
Reference Manual
Power.
.