Table of Contents
Advertisement
5.9 BT MANAGER
Go to Start | Settings | Control Panel and select BT Manager.
Note: Make sure the BT power is turned off while configuring the following settings. All
settings configured here will not take effect until the BT power is restarted through
Power Management.
5.9.1 GENERAL SETTINGS
Decide whether to automatically re-connect to all Bluetooth services after the mobile
computer resumes from warm or cold boot. Furthermore, when the mobile computer
resumes from suspend mode, you can determine whether to maintain all Bluetooth
connections and perform an inquiry on a remote device at a regular interval.
Refer to
5.9.2 Preference
for a specific service.
Note: To save the battery power of your mobile computer, we suggest you disable "Auto
Inquiry".
Tap [Apply] to save the current settings, or tap [Reset to Default] to restore defaults.
to configure "Last Connection" and "Auto Inquiry" settings
Chapter 5
Using Bluetooth
107
Advertisement
Table of Contents
