Test Image Command - Basler WOOD BURNING FIREPLACE Wood Burning Fireplace

4.2.5 Test Image Command

Purpose: To enable or disable a test image, and to select a test image. See section
explanation of the available test images.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Basler A500
k
PRELIMINARY
Cmd-ID R/W-Flag
0xA1 1
Cmd-ID R/W-Flag
0xA1 0
Cmd-ID R/W-Flag
0xA1 0
None
Byte 1 An ID that specifies the test image (see the table below).
ID Test Image
0x00 Image from sensor (standard mode)
0x01 Gray Gradient Test Image
0x02 Color Gradient Test Image (Bayer pattern)
0x03 Running Line Test Image
0x04 White Screen Test Image
Configuring the Camera
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
for an
3.12
-
4-23