Digital Shift - Basler WOOD BURNING FIREPLACE Wood Burning Fireplace

Configuring the Camera

4.2.4.10 Digital Shift

Purpose: To enable or disable digital shift. See section
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
See section
4-18
PRELIMINARY
Cmd-ID R/W-Flag
0xA5 1
Cmd-ID R/W-Flag
0xA5 0
Cmd-ID R/W-Flag
0xA5 0
None
Byte 1 An ID that specifies the digital shift status
(see the table below).
ID Digital Shift
0x00 No digital shift
0x01 Digital shift once
0x02 Digital shift twice
0x03 Digital shift by three
3.10.2 for precautions that you must consider when using digital shift.
3.10 for an explanation of digital shift.
Data Length
1
Data Length
1
Data Length
1
(multiplies output 2X)
(multiplies output 4X)
(multiplies output 8X)
Data
-
Data
1 Byte
Data
1 Byte
Basler A500
k