Positive Offset - Basler WOOD BURNING FIREPLACE Wood Burning Fireplace

4.2.4.7 Positive Offset

Purpose: To set the positive offset or to read the current positive offset setting. If you use OfsPos, set
OfsNeg to 0. See section
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
Basler A500
k
PRELIMINARY
3.7 for more information on offset.
Cmd-ID R/W-Flag
0x86 1
Cmd-ID R/W-Flag
0x86 0
Cmd-ID R/W-Flag
0x86 0
None
Byte 1 Negative offset setting
The positive offset setting can range from 0x00 to 0xFF. Since the offset is
mostly negative, we recommend to set this value to 0.
Configuring the Camera
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
-
4-15