Test Image Command - Basler A202K Manual

4.2.4.16 Test Image Command

Purpose:
Type:
Read Command:
Response:
Write Command:
Response:
Data Format:
k
BASLER A202
To enable or disable a test image. See Section 3.10 for an explanation of the available test
images.
This is a read or write command.
Cmd-ID
0xA1
Cmd-ID
0xA1
Cmd-ID
0xA1
None
Byte 1
ID Test Image
0x00 No test image
0x01 Test Image 1 (diagonal gradient pattern)
0x02 Test Image 2 (moving gradient pattern)
0x03 Test Image 3 (vert./horiz. gradient pattern)
DRAFT
R/W-Flag Data Length
1
R/W-Flag Data Length
0
R/W-Flag Data Length
0
An ID that specifies the test image
(see the table below).
Configuring the Camera
Data
1 -
Data
1 1 Bytes
Data
1 1 Byte
4-19