Remotely Accessing The Scans On The Sd Card - Faro FOCUS3D X 130 User Manual

• A list with the available wireless network connections appears. Choose the
scanner's WLAN network in this list (the scanner should be listed with the
above mentioned network name) and click the Connect button on Windows
XP or just select it on Windows 7.
• When prompted, enter the WLAN encryption key.As soon as the notebook is
connected to the scanner, open your web browser. In the address field of the
web browser enter the WLAN IP address of the scanner followed by port 8400
(e.g. http.//172.17.16.23:8400) to access the controller software.
• P
LEASE NOTE
please make sure that you do not use a Proxy server for the network
connection. With some web browsers, like the Internet Explorer, it might also
be necessary to allow blocked content in order to run the controller software.
• The Home screen of the controller software appears in your web browser and
you can control the scanner as usual.
Figure 6-22 Controller software in web browser of remote device

Remotely Accessing the Scans on the SD card

If you would like to access the scan files that are stored on the scanner's
removable SD card from a connected remote device, enable remote access in the
scanner's controller software under Home > Manage > General Settings first.
See "General Settings" on page 78. Then open a file explorer on your remote
device (e.g. Windows Explorer) and enter the following address into its address
bar: „\\WLAN_IP_ADDRESS_OF_SCANNER\Scans" (e.g.
\\172.17.16.23\Scans). You should have access to the scans now. You may
: the Adobe Flash Player must be installed on your system and
Chapter 6: The Focus
®
FARO Laser Scanner Focus
86
3D
X 130 Manual
January 2014
3D
X 130 Controller Software