Faro FOCUS3D X 130 User Manual page 136

damage to the Product was in fact caused in storage, transit or on installation, the
opinion of FARO's technical advisors, acting reasonably, shall be conclusive.
3.00Installation and Operator Training
3.01The Purchaser shall be responsible for installation of the Product, including,
without limitation, the preparation of its premises, the uncrating of the Product
and setting up of the Product for operation. Purchaser may elect to order contract
services from FARO to perform this service should they elect to do so.
4.00Warranties and Limitation of Liability
4.01FARO warrants that (subject to Section 4.06), the Product shall be free from
defects in workmanship or material affecting the fitness of the Product for its
usual purpose under normal conditions of use, service and maintenance. A
complete statement of FARO's maintenance/warranty service is set forth in
Appendix B: Purchase Conditions.
4.02FARO warrants that the Software shall operate according to specifications
and the System shall operate and perform in the manner contemplated in
connection with the usual purpose for which it is designed.
4.03The maintenance/warranty set out in paragraphs 4.01 shall expire at the end
of the twelve (12) month period commencing on the date of shipment from the
FARO factory (the "Maintenance/Warranty Period").
4.04Subject to the limitations contained in Section 4.06, the Warranties shall
apply to any defects found by the Purchaser in the operation of the Focus
130 and reported to FARO within the Maintenance/Warranty Period. If the
3D
Focus X 130 or the Software is found by FARO, acting reasonably, to be
defective, and if the defect is acknowledged by FARO to be the result of FARO's
faulty material or workmanship, the Focus
to the extent found by FARO to be necessary or at the option of FARO, replaced
with a new Focus
4.05Claims under the Warranties shall be made by delivering written notice to
FARO of the defect in the System, the Focus
of receipt of such notice, FARO shall have the System and Focus
diagnosed by its service personnel, and maintenance/warranty service will be
provided at no cost to the Purchaser if the System and Focus
FARO to be defective within the meaning of this Section.
(If, in the reasonable opinion of FARO after diagnosis of the system and the
3D
Focus X 130 are not defective, the Purchaser shall pay the cost of service,
3D
X 130 or parts thereof at no cost to the Purchaser.
®
FARO Laser Scanner Focus
3D
X 130 will be repaired or adjusted
3D
X 130. Within a reasonable time
5
3D
X 130 Manual
January 2014
3D
3D
X 130
3D
X 130 is found by
X