Selecting A Scan Profile - Faro FOCUS3D X 130 User Manual

Scan Size [Pt] - Shows the size of the scan in points horizontally x vertically.
The vertical size may only be changed by setting a new resolution or by changing
the scan area angle.
Scan Duration, Scan File Size - Expected scan time and file size in Megabytes
according to the chosen resolution, quality value, and scan range. Please note that
the values shown here are approximate values.
: the scan duration shown in Figure 5-28 and the scan duration values
N
OTE
shown in the scanning parameters view differ from each other, because the
values in Figure 5-28 are pure net values, the time needed for capturing photos
in color mode and pre and post processing time are not taken into account.

Selecting a Scan Profile

(Home > Parameters > Selected Profile)
Prior to capturing a scan, you may select a scan profile that fits the needs of the
scene and the desired scan quality.
This view shows a list of all available scan profiles. This list contains factory
predefined profiles which are read-only (see "Factory Predefined Scan Profiles
Overview" on page 75 for an overview of the available factory predefined scan
profiles) and custom profiles which can be created and manipulated under Home
> Manage > Profiles. For more information, see "Creating a Scan Profile" on
page 73.
Select a profile by touching the corresponding button. The selected profile will
be highlighted and marked with a check mark. To view the details of the selected
profile, touch its button once again.
®
FARO Laser Scanner Focus
Figure 5-17 Select a Profile
43
3D
X 130 Manual
January 2014
Chapter 5: Getting Started