Bottom
3/8" screw thread to mount the scanner to standard photo tripods.
M5 screw threads to mount the scanner to customer specific fixtures.
Pin hole (diameter 8 mm) for scanner adjustment.
Pin hole (diameter 6 mm) for scanner adjustment.
Cover of the automation interface for automated applications. Remove to get
access to the automation interface of the Focus
please read the Focus
automation interface if it is not needed or not in use.
Type label
Cooling fan openings - please keep these openings uncovered to ensure proper
cooling of the scanner.
For a detailed sketch of the scanner mount, see "Focus
Dimensions" on page 116.
FARO
Figure 4-5 Bottom View of the Focus 3D X 130
3D
X 130 automation interface manual. Cover the
®
Laser Scanner Focus
3D
X 130. For more information,
23
Chapter 4: Parts and their Functions
3D
X 130 Manual
January 2014
3D
X 130 Mount