Mounting - Faro FOCUS3D X 130 User Manual

®
FARO Laser Scanner Focus
January 2014
In extreme windy conditions, please make sure that the tripod has a stable
standing. For this, you should affix a heavy weight to the tripod or sandbag its
feet.
Figure 5-3 Gitzo Carbon Fiber Tripod (available as optional accessory)
Mounting the Focus
To mount the Focus
1 Remove the Focus
damage or distortion. Check mirror for damage due to scratches, cracks,
distortion and inspect for cleanliness.
2 Attach the upper part of the quick release to the scanner's mount. Make sure to
tighten the screw.
3 Mount the counter piece of the quick release onto the tripod. Make sure that it
is fixed securely.
4 Carefully mount the Focus
its counter piece and lock its fastener. Test that the scanner is correctly locked
in place by gently attempting to lift it from the tripod.
5 If applicable, remove the ruggedized aluminium protection cover from the
scanner.
Chapter 5: Getting Started
3D
X 130 Manual
3D
3D
X 130 to a tripod we recommend using the quick release.
3D
X 130 from the case, check outer casing for any signs of
3D
X 130 with the upper part of the quick release to
X 130
30