Setting The Unit Of Length And The Temperature Scale - Faro FOCUS3D X 130 User Manual

®
FARO Laser Scanner Focus
January 2014
Proceed accordingly with the month and the day buttons.
Discard Changes - Click to discard your changes.
Leaving the view with the back or home button applies your changes. A
message will be displayed, informing you that you may need to restart the
scanner for the changes to take effect.

Setting the Unit of Length and the Temperature Scale

You can change the units scale under Home > Manage > General Settings >
Units.
Lengths will be displayed by the controller software either in meters or in feet.
Select the favored unit of length by touching the corresponding button.
Temperatures will be displayed either in Celsius or in Fahrenheit scale. Select the
favored temperature scale by touching the corresponding button.
GPS coordinates are either displayed in decimal degree notation (e.g.
+34.9823450° E) or in degree-minute-second notation (e.g. 34º 58' 56.44'' E).
Chapter 5: Getting Started
3D
X 130 Manual
Figure 5-13 Restart Scanner
Figure 5-14 Change Unit of Length
40