Sounds - Faro FOCUS3D X 130 User Manual

® 3D
FARO Laser Scanner Focus X 130 Manual
January 2014
Power Management - Set up the screen saver; view the detailed battery charge
state and enable or disable start on power which allows the scanner to be turned
on by connecting the power supply. See "Power Management" on page 81.
Display - Set the brightness of the screen, recalibrate it or change the wallpaper
of the Home screen. See "Display" on page 82.
Date & Time - Change the displayed time and date format and change the date
and time of the scanner. See "Setting the Date and Time" on page 38.
Language - Change the language of the controller software. See "Setting the
Interface Language" on page 37.
Units - Change the displayed unit of lengths. See "Setting the Unit of Length and
the Temperature Scale" on page 40.
3D
WLAN - The Focus X 130 has an integrated WLAN antenna that allows to
remotely connect to the scanner and to control it with an external device. Click
the button to view and change the WLAN settings and to turn WLAN on or off.
See "WLAN / Connecting to the scanner via WLAN" on page 83.
: WLAN is only officially supported on scanners with the multi-
P
LEASE NOTE
sensor package.
Scanner Details - View and change details of the scanner. See "Scanner
Details" on page 86.
Remote Access to Scans - Enabling this function will allow you to have access
to the scans on the inserted SD card on remote devices that are connected to the
scanner via WLAN or Ethernet. For more information, see "WLAN / Connecting
to the scanner via WLAN" on page 83. Please note that the status of the SD card
will be set to busy as long as this function is enabled. Please disable it before you
remove the SD card from the scanner. Remote access will automatically be
disabled when shutting down the scanner, you will have to enable it again after
reboot.
CAUTION: Risk of Data Loss! Please only use if you're about to access scan
files via network! Absolutely make sure not to remove the SD card until remote
access is disabled again.

Sounds

(Home > Manage > General Settings > Sounds)
80
3D
Chapter 6: The Focus X 130 Controller Software