Faro FOCUS3D X 130 User Manual page 123

Error Message
Scanner temperature too
low
Temperature too high
Internal memory full
Possible file system cor-
ruption on SD card
detected. Do you want
the scanner to repair the
file system on the SD
card?
Unknown error
®
FARO
Description
Temperature of the scanner
is too low. Scanning is not
possible.
Temperature of the scanner
is too high. Scanning is not
possible.
The internal scanner hard-
drive is full.
The scanner has detected file
system corruptions on the
inserted SD card. Damages
to the file system may
occure when you remove the
SD card from your computer
without using the „Safely
Remove Hardware" option
in Microsoft Windows.
An unknown error occured.
Figure 8-3 Error Message
115
Laser Scanner Focus
Please warm up the scanner
before further use.
Please shut down the scanner
and let it cool down or check
if the fan is running. If not
enable fan cooling under
Manage - Sensors - Tempera-
ture
Please try to free some space
by deleting wallpapers, oper-
ators, projects or profiles or
by clearing the log file. If that
does not help, please contact
FARO customer service.
It is recommended to let the
scanner repair the SD card.
Please note that repairing
might delete erroneous files
from the SD card. If you see
this error message again and
again, you should consider
replacing the SD card. To
prevent damages to the file
system when removing the
SD card from your computer,
please always use the „Safely
Remove Hardware" option in
Microsoft Windows.
Please restart scanner. If the
problem still occurs after
restart, contact FARO Cus-
tomer Service
3D
X 130 Manual
January 2014
Action
Chapter 8: Appendix