Firmware Update - Faro FOCUS3D X 130 User Manual

® 3D
FARO Laser Scanner Focus X 130 Manual
January 2014
: The restored data will override existing data on the scanner.
P
LEASE NOTE
E.g. if you want to restore or import scan profiles, all the existing scan profiles on
the scanner will be overridden by the new profiles. The scanner's default profiles
remain unaffected from this operation. We recommend backing up your data
before restoring.

Firmware Update

(Home > Manage > Service > Firmware Update)
Figure 6-32 Update Firmware
3D
If you want to update the firmware of your Focus X 130 you have to copy the
update file to the folder "Updates" on your SD card first. If this folder does not
exist, you have to create it manually. Please pay attention to lower and uppercase
when entering the folder name.
Insert the SD card with a firmware update file, and then press the Update
button. The update process may take up to 30 or 40 minutes depending on the
extent of the update. Please do not manually shut down or power off the
scanner during the update process!
After the update is complete the scanner might restart automatically.
94
3D
Chapter 6: The Focus X 130 Controller Software